• Welcome to BirdForum, the internet's largest birding community with thousands of members from all over the world. The forums are dedicated to wild birds, birding, binoculars and equipment and all that goes with it.

    Please register for an account to take part in the discussions in the forum, post your pictures in the gallery and more.
ZEISS DTI thermal imaging cameras. For more discoveries at night, and during the day.

Kowa and Canon (1 Viewer)

Jonathan Williams

Well-known member
Hi all,
I have the new big kowa scope (can't remember the number i'm afraid) with a zoom eyepiece and a 30x wide also, and a Canon A590IS digital camera. Does anyone know if you can get a good adaptor to marry these two up??

Any suggestions greatfully received.

Thanks

Jonathan
 
If you have Kowa 880 or 770 series scope you should buy Kowa TSN-DA1, if it is older 821 or 823 scope you need Kowa TSN-DA10. You can also take Kowa TSN-DA4 universal adapter, but then you will need either DA1 or DA10 as well. To match your camera to DA1 or Da10 (when not using DA4) you should also buy a Canon LA-DC52G adapter and Kowa 58mm adapter ring to screw the camera to the Kowa's adapter. You should also check out on Kowa webpage if your eyepiece does require a special extension on the eyepiece side.
 
...you should also buy a Canon LA-DC52G adapter and Kowa 58mm adapter ring to screw the camera to the Kowa's adapter...


Shouldn't it be a Kowa 52mm adapter ring since the filter size of the
Canon LA-DC52G adapter is 52mm?

Dalcio
 
Thanks for the advice guys.

Could I please ask you to imagine you're talking to a digiscoping idiot, which you are, and tell me where you can get hold of all of the above.

Many thanks for all the help,

Jonathan
 
Warning! This thread is more than 15 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Users who are viewing this thread

Back
Top